Global Air King couplings are recommended for use on air lines for pneumatic equipment.
Features:
The maximum recommended working pressure for Dixon Air King universal couplings is up to 150 PSI at ambient temperature (70°F). Recommendations are based on the standard Natural Rubber Washer, AWR4.
Connection:
Connections are made by pushing two Dixon Air King heads together and rotating them a quarter turn. When the fittings are properly connected an Air King safety clip will pass through at least one set of holes. Always use an Air King safety clip, cotter pin, or wire to ensure the couplings are properly connected and to keep the couplings from being accidentally disconnected.
Disconnection:
Remove the safety clip, cotter pin or wire. Press the heads firmly together and turn them counterclockwise. The heads will then separate. NEVER attempt to disconnect any hose while pressure is in the line.
Interchange:
Although Dixon Air King couplings may interchange with other manufacturers' fittings, we do not recommend their use with other products. Not all locking heads are made to the same standards as Dixon Air King. Use with other brands of fittings may create an unsafe condition, due to poor design or worn equipment.
• Full line of Dixon Air-Flow, Valve & Coupling products available from KSCdirect