The Band-It Band-Loc tool is used to apply stainless steel Band-Loc Ties, this is a lightweight tool and has adjustable tension and automatic cut off.  The Band-Loc weighs in at about 1 lb, light enough to carry around with you where ever you will be working.

Below you will find instructions on how to use your new Band-Loc tool:

First you will always want to wear your safety glasses, some of the clamps can be metal and you do not want to risk getting something like that stuck in maybe your eye or something.

Next you will want to adjust your tension, you can achieve this by turning the the adjustment knob, you will see the setting in the display window on the side of the handle, the spaces in between the numbers counts as one half setting.

You will want to extend the handle open to release the gripping mechanism, insert the tail of the clamp through the front load entry.

Squeeze the handle repeatedly to tighten the band around the object, be sure to release the handle completely to use the full pull up stroke of the tool, remember the buckle must be secure against the tool head. Once the preset tension has been reached, the handle will no longer release completely.

To cut off the excess clamp tail you will have to squeeze the handle one last time, once the band has been cut you will have to release the handle to separate the tool from the clamp.

When you have finished with the current band you will have to reset the tool before it can be used again, you do this by extending the handle out until it snaps in place.

This tool has a tension setting range of 0-8

KSCDirect also carries a large range of Band-It items.

If you have any questions please contact us at 800-445-1895 or email us at info@kscdirect.com and one of our salespeople will gladly help you.