Authorized wholesale distributor. Source KSCdirect.com for Manabloc and Minibloc products. Terms available for qualified customers. Credit cards accepted.
MANABLOC units come from the factory pre-assembled with color-coded caps designating hot and cold ports. Hot ports are designated by red caps, cold ports by blue caps. Supply line must be ordered separately. All MANABLOCs include port compression connections, drill templates, instruction guide, faceplate and port labels. The MANABLOC does not come with supply connections or mounting brackets.
Vanguard’s MANABLOC mounting bracket, stamped from 16-gauge zinc plated steel, is pre-drilled to mount on 16” center studs. The MANABLOC mounting holes will align precisely with the pre-drilled holes on the bracket.
MANABLOC & MINIBLOC Connections
WATER SERVICE SUPPLY FITTINGS FOR MANABLOC & MINIBLOC (Fittings connect supply lines to MANABLOC & MINIBLOC)
MXASA5 = 1” Brass Insert with o-ring x MANABLOC
MSA45 = 3/4” MPT x MANABLOC
MSA55 = 1” MPT x MANABLOC
ECAP1 = End Cap
MXSC45 = 3/4” Comp (7/8” OD) x MANABLOC (For SDR-9 PEX, CPVC and Copper)
MSS55 = MANABLOC x MANABLOC
MXASA4 = 3/4” Brass nsert with o-ring x MANABLOC
MXSA = 1” Brass Insert x MANABLOC
MXSA4 = 3/4” Brass Insert x MANABLOC
MXRSA4 = 3/4” PolyAlloy Insert x MANABLOC
MXASA6 = 1 1/4” Brass Insert with o-ring x MANABLOC
METALLIC BALL VALVES (Main Shut-Off for MANABLOC & MINIBLOC SYSTEMS)
CRIMPsert x CRIMPsert: Ball valve features metallic body, brass ball & stem, Teflon® seats and seals, quarter-turn operation. Required for use as a main shut-off valve from the supply line to the MANABLOC & MINIBLOC. See XLV44 and XLV55
MANABLOC Plumbing Control Unit
View our Manabloc Control Unit Catalog
These Standard MANABLOCs combine 3/8” and 1/2” fixture line ports for:
• Lines sized specifically for the fixture requirements of 2.5 gpm and 4.0 gpm
• Optimum water savings (Water savings result from using 3/8” for 2.5 gpm fixtures only)
• Faster Hot Water Delivery (Fast delivery result from using 3/8” for 2.5 gpm fixtures only)
• Special configurations for homes with water softeners (MXBD10)
Termination Manifolds
- View Termination Manifolds catalog
- MINIBLOCS WITH VALVES (For PEX SDR-9 only) Can be used to serve multi-fixture end runs. Must be accessible.
- TERMINATION MANIFOLD - COPPER Commonly used to serve multi-fixture end runs. Used behind walls. Type L Copper. Ports are on 2" centers.
Manabloc Accessories
- Valve Stem Replacement Kit: Valve Stem Replacement Kits are for MANABLOCs and MINIBLOCs.
- MANABLOC & MINIBLOC Lock-in Nuts
- MANABLOC & MINIBLOC Lock-in Inserts
- Ferrules
- Insert Stiffener - Stainless Steel